Description
MATERIALS
Aluminum-Tinned Copper
CHARACTERISTICS
- Easy installation with manual, mechanical or hydraulic puncher.
- Made of high conductivity aluminum.
- Para uso interior o exterior.
- For indoor or outdoor use.
- Copper-Aluminum (Cu-Al), Aluminum-Aluminum (Al-Al) or Copper-Copper (Cu-Cu) connections on the blade or barrel.
- Body with tin coating to increase resistance to corrosion.
- It can be used in voltages up to 35,000 volts.
- The connector features a countersunk barrel to facilitate cable entry and prevent possible conductor damage during insertion.
- The standard barrel allows an average number of strikeouts, which increases the mechanical resistance of the connection.
- The material is free of cracks, cavities, blowholes, surface or internal defects and any failure that may affect correct operation.
- Connectors are clearly marked with color coding on the barrel.
- The barrel is pre-charged with a corrosion-inhibiting and current-carrying compound.
APPLICATION
The bimetallic compression terminals are part of an electrical system that uses installation tools and sockets to make the copper-Aluminium, Aluminum-Aluminium, Aluminum-Copper connections in a firm, robust and high-quality way. These terminals are characterized by creating permanent unions that ensure the termination and splicing of cables according to the design of the installation. The connectors have the function of improving the electrical and mechanical contact of the cable, since these elements will be used outdoors or indoors. This type of terminal is suitable for use in connections that are subject to mechanical stress, either due to the effect of the wind or due to the installation, such as connection to equipment, mainly to electrical panels.
NORMATIVITY
This product is manufactured under the applicable standards established by Underwriters Laboratories Inc. UL 486A – 486B Wire Connectors, the Colombian Technical Standard NTC 4627, NTC 2050 and the RETIE Electrical Installations Technical Regulation.
CERTIFICATION
Compliance with resolution 90708 of August 30, 2013 of the Ministry of Mines and Energy. Technical Regulation of Electrical Installations RETIE: 2013 Chapter 3, Article 20.12, under ICONTEC CSR-CER526753 certification. Compliance with the UL 486A-48B (2018) Wire connectors standard, under ICONTEC CSC-CER592351 certification.
