H type connector in aluminum main cable 1/0 AWG – 477 18/1 KCMIL derivation 1/0 AWG – 477 18/1 KCMIL

Code: 3CC20H4747

H type connector in aluminum main cable ACSR 1/0 AWG – 477 18/1 KCMIL derivation ACSR 1/0 AWG – 477 18/1 KCMIL

Available on backorder

Solicitar su pedido al teléfono 3138193693/Request your order by phone 3138193693.

Description

MATERIALS

Aluminum

CHARACTERISTICS
  • Easy installation with manual, mechanical or hydraulic puncher.
  • Made of high conductivity aluminum.
  • For indoor or outdoor use.
  • The material is free of sharp edges, cracks, cavities, blowholes, surface or internal defects and any failure that may affect correct operation.
  • Connectors are clearly marked with the manufacturer, gauge range, die, and conductor material to be used.
  • The connector has a current conductive and corrosion inhibiting compound in the conductor grooves.
  • It has two wings (jaws) on each side of the connector to correctly retain the conductor.
  • The connector amperage is in accordance with the capacity of the conductor gauge.
  • Minimum mechanical resistance.
  • Environmentally friendly packaging.
APLICATION

H-type parallel groove connector for shunting aluminum conductors, especially in low or medium voltage overhead networks, application in ACSR, AAC and compact conductors, easy installation through compression tools (crimps), supplied with inhibiting grease. Manufactured with high conductivity aluminum.

NORMATIVITY

This product is made under the applicable standards established by the Colombian Technical Standard NTC 2244, NTC 2050 and the RETIE Electrical Installations Technical Regulation.

CERTIFICATION

Compliance with resolution 90708 of August 30, 2013 of the Ministry of Mines and Energy. Technical Regulation of Electrical Installations RETIE: 2013 Chapter 3, Article 20.12, under the certification CSR-CER526753 of ICONTEC. Compliance with the NTC 2244 standard, under the ICONTEC CSC -CER526750 certification.

Additional information

Weight 7.8 lbs
Dimensions 35 × 33 × 20 cm
Main caliber (A)

Bypass gauge (B)

Width H (mm)

Height W (mm)