Terminal solder in copper 175 amps

Code: 3CC1W01B75

175 Amp Single Hole Copper Solder Type Crimp Terminal, 3/0 AWG Wire Size, 1/2″ Screw, Untinplated

$13,738

In Stock
Clear

Description

MATERIALS

Copper

CHARACTERISTICS
  • Easy installation with manual, mechanical or hydraulic puncher.
  • Made of 99.9% high purity copper.
  • For indoor or outdoor use.
  • Copper-copper (Cu-Cu) spade or barrel connections.
  • The connector features a countersunk barrel to facilitate cable entry and prevent possible conductor damage during insertion.
  • The connectors are clearly marked with the manufacturer on the blade.
APPLICATION

Solsar type compression connectors are part of an electrical system that uses installation tools and sockets to make connections that are firm, robust and of high quality. These connectors are characterized by creating permanent unions that ensure the termination and splicing of cables according to the design of the installation. The connectors have the function of improving the electrical and mechanical contact of the cable, since they can be used indoors. This type of connector is suitable for use in connections that are subjected to mechanical stress, either due to the effect of the wind or due to the installation, such as connection to equipment, mainly electrical panels.

NORMATIVITY

This product is manufactured under the applicable standards established by Underwriters Laboratories Inc. UL 486A – 486B Wire Connectors, the Colombian Technical Standard NTC 4627, NTC 2050 and the RETIE Electrical Installations Technical Regulation.

CERTIFICATION

Compliance with resolution 90708 of August 30, 2013 of the Ministry of Mines and Energy. Technical Regulation of Electrical Installations RETIE: 2013 Chapter 3, Article 20.12, under the certification CSR-CER526753 of ICONTEC. Compliance with the UL 486A-48B (2018) Wire connectors standard, under the ICONTEC CSC-CER592351 certification.

Additional information

Weight 1.76 lbs
Dimensions 16 × 9 × 7 cm
Packaging unit

,

Screw Diameter ØT (in)

Barrel: B ± 2 (mm)

Length: L ± 1 (mm)

1